EVENT THEME: Warzone is covered by deadly invisible mines. Instead of risking human lives, bots are assigned to find and dispose those. Design a manually controlled robot capable of detecting mines and built with wire cutting mechanism to dispose those.
• EVENT SYNOPSYS:
▪ General rules:
 This is a team event.
 The teams should take complete responsibility for their bots. College shall not take any responsibility if the bots are misplaced, damaged, stolen or destroyed.
 The members must bring their identity cards of college.
 No person should be a member of 2 teams.
 No bot can be shared by two teams.
 The number of participants allowed per team minimum is 3 and maximum 5.
 Damage to arena, may lead to disqualification of the bot.
 Bot cannot be constructed using readymade Lego kits or any readymade machine.
 The decision of the coordinator will be deemed final.
 A team can be disqualified on disciplinary grounds.
 Team can either use a Hydraulic Mechanism or Gear Mechanism to cut the wire.
▪ EVENT RULES:
➢ Preliminary Round:
Single bot with Cutting and Magnet Detecting Mechanism and conveyer belt(optional) is required. The road’s width will be according to the bot’s specification. There will be sand on arena in which mines will be hidden. There will be colored wires to disable the mine to clear its path. Bot will have to detect it, and cut proper wire to dispose that mine. There will be LED indication for each successful disposal. Bot have to dispose such mines to clear a path for itself to reach a certain destination.
➢ Final round:
Top 10 to 16 teams will be selected for the final round.
The arena for the second round will be decided on the spot.
▪ Scoring Rules:
❖ Mine Detection: 100 points, Wire cut: 150 points.
❖ Negative Points:
Obstacle touch: -20 points, Hand Touch: -50 points,
❖ Each team will be provided with maximum 1 technical time-out of 2 minutes, after which there will be a penalty of 100 points during which they can repair their bots.
❖ Preliminary round will be limited to 4 minutes for each team.
❖ Rules for final round will be declared later.
▪ Bot specification:
❖ Each bot should fit inside a box of (30*35*30) cm (with 10% tolerance allowed). Including your cutting mechanism.
❖ The Bot should have an arm and a cutter to cut objects.
❖ The maximum weight of bot should not exceed 3 kg.
❖ The potential difference between any two electrical points on the bot must not exceed 18 volts throughout the run.
❖ Bot must be manually controlled.
❖ Ready made kits are not allowed.
❖ Bot can be wired or wireless.
❖ IC engines are not allowed.
PS: All rules are subject to change without prior information.
Event Heads:
NILAY SEN (8272915279)
BIKASH MAHATO (7003351769)

Event Focus: For an undercover operation, our army needs to know the details of the terrorist location to be on a safer side. Design a wireless robot which do live video streaming and transfer data to our army. Hence mount a camera on the robot and control it from a safe zone through video streaming on a monitor.
Day 1
Preliminary Round: The bot must have some steaming capability (Using mobile phone or other streaming devices) which is to be mounted on the bot which will be streaming the live video of the track. The controller has to control the bot from a safe zone through the video streaming displayed in a screen. The bot has to climb inclined path, and overcome the obstacles. Inclination will be less than 30 degrees.
Day 2
Final Round: Top 10 teams will be selected for the final round. The arena for the second round will be disclosed on the spot.
Bot Specification:
1. The dimension of bot should not exceed 30x30x30 cm (LXBXH) with 10% tolerance.
2. The weight of the bot should not exceed 3 kg’s.
3. The bot has to be completely wireless.
4. The bot should have a streaming capability (Using mobile phone or other streaming devices).
Rules (Same for the both days):
1. Team participation with minimum 3 or maximum 5 members.
2. Participation in more than 1 team, Sharing Bots between teams or any ready-made bot is not allowed.
PS: All rules are subject to change without prior information.
EVENT HEADS:
IBTESHAM QAISAR (9007160948)
ANIL KUMAR (7488380180)

Event Focus:
Due to an overnight firing near the borders, some of the roads connecting the military base camp have been severely destroyed. The camp has lost all its contacts with the headquarters and is running very low on food and supplies. After answering the distress call, the headquarter has sent an autonomous bot to mend the destroyed road so that the military vehicle containing the food and other requirements can easily reach the military base camp. As the bot shall be moving very close to the line of control there are higher chances of conflicts, thus the bot has to automatically detect the obstacle and remove it with a rack and pinion attached to it and hence we shall be expecting the least casualty.
RULES:
1. The teams should take complete responsibility for their bots. College shall not take any responsibility if the bots are misplaced, damaged, stolen or destroyed. This applies for in house teams as well.
2. A team must have a minimum 3 members and a maximum of 5 members. A team must comprise of members from the same colleges.
3. We will measure your bot again at the beginning of your run. If the specifications at the time of registration does not match the one at the time of your run (with the tolerance level of 3%), you will be disqualified.
4. A bot cannot be shared by 2 or more teams. Each team needs to have their own bots.
5. Using unfair means will lead to disqualification and we shall also withhold the prize money if the winning team in question is found to be guilty.
Technical Constraints:
1. The size of the bot must not exceed 20cm *20cm *20cm.
2. Individual parameters to be measured with a tolerance of 10%.
3. The robot may use an external or on-board power supply.
4. The potential difference at any two points of the robots must not exceed 12V.
In case of external power supplies and/or wired communication, pulling wires to alter the movement of the robots WILL NOT BE TOLERATED AT ALL and the responsible team will be DISQUALIFIED.
Arena Specifications
1. The width of the line will be 2.5cm (approx.).
Event Rules
There will be two rounds:
Prelims
Finals
Prelims:
• Two bots will be placed simultaneously on the track, each bot has to follow its own path and reach the destination.
• After reaching the destination, both the bots will find an obstacle on its path.
• It has to stop itself at distance 5cm away from the obstacle, points shall be deducted in case any part of the bot touches the obstacle.
• The bot which will perform this task earlier will be made winner and shall qualify to the next round.
• Hand touches, time outs and restarts will be given which shall cost negative points. Finals:
• The bot will be placed on the track containing several obstacles; it has to use the hand mechanism to remove the obstacles to make the line continuous.
• The rack and pinion mechanism should not begin when the bot is in locomotion.
• The bot has to successfully remove all the obstacles and reach its destination.
• This round is a time trail round and the time taken to complete the task will play a crucial role.
**IN ANY CIRCUMSTANCES THE DECISION OF THE COORDINATORS WILL BE FINAL.
Event Head:
ANKITA PAL (9051874658)
JYOTIRMOY MASCHATAK (9564782824)

Event Focus:
After the war there is a lot of hazardous debris scattered all over the area. Participants have to build a manually controlled robot which is capable of pocketing the debris (balls) into same coloured dumping yards (hole) avoiding the obstacles in the path.
Event Rules:
This event is only for 1st year students
Preliminary Round:
In this round only one bot will be there in the arena, the bot has to pocket the ball in the same coloured hole. The time and the points will be the parameter deciding the winner of this round.
Final Round:
Top 16 teams will be selected for the final round.
This will be the one to one round between two bots. The details and rules of this round will be disclosed at the event. Bot Specification:
• The dimension of bot should not exceed 30 X 30 X 30 cm (L X B X H) with 10% tolerance.
• The weight of the bot should not exceed 3 kg’s.
Rules (Same for the both days):
• Team participation with minimum 3 or maximum 5 members.
• Participation in more than 1 team, Sharing Bots between teams or any ready-made bot is not allowed.
PS: All rules are subject to change without prior information.
EVENT HEAD:
DEVI PRASAD TIWARI (9038174600)
JAYANTA PAUL (9874370925)